Sale!

ATC SIACD CD/DAC Integrated Amplifier

RM22,000.00 RM15,000.00

The new, compact, SIACD expands on, and is styled to match ATC’s range of stand-alone electronic products for home installation. The SIACD is built to the same design and manufacturing standards as the company’s internationally renowned professional audio products.
ATC SIACD Multi-Source Integrated Amplifier / CD / DAC

This new product is designed as a simple yet versatile one-box solution for D-A conversion, CD playback, pre and power amplification duties. The SIACD is housed in a rugged yet elegant chassis, only 315mm/12.4” wide. Styling compliments the rest of ATC’s range of outboard pre and power amplifiers and the product is available in both black and silver brushed and anodised finishes.

Whereas many other manufacturers’ favour class-D power amp technology for compact devices, ATC have based the power amp design on the class A/B circuits employed in their highest performance professional, active loudspeakers, thus ensuring the highest possible performance of this vital element of an all-in-one player amplifier. In this revised design, ATC engineers have made further improvements to their discrete MOSFET output stage to give vanishingly low levels of distortion, very wide bandwidth and a reduced idle temperature. Maximum output power is 100W per channel, continuous, into 8 ohms with both channels driven. The resolution offered by this approach is simply above and beyond what is available from most ‘high-end’ stand-alone power amplifiers, let alone ‘all-in-one’ player/amplifiers.

The preamp/DAC stage features two, line level, stereo, analogue inputs and three digital inputs. Both analogue inputs are equipped with rear panel mounted, RCA/phono connections. One of the two inputs also features a front panel mounted 3.5mm jack input for simple connection to portable music players. The USB, SPDIF and optical inputs are mounted on the rear panel.

The DAC utilises Wolfson’s WM8740 chipset and is compatible with 16 to 24 bit word lengths and sample rates up to 192kHz (coaxial and optical digital inputs only). Excellent digital clock recovery ensures signal integrity is maintained even with poorer quality digital sources and the SIACD. The USB input is compatible with word lengths up to 16 bits and sample frequencies up to 48kHz and is galvanically isolated from the digital source via a high performance transformer.

The SIACD headphone amplifier is specified to drive a very wide range of headphone sensitivities and impedances. It features very low distortion and noise and an extremely wide and flat frequency response for best possible performance. The headphone output is front panel mounted.

Max. Power Output (Continuous Av. 8 ohms, 1kHz, both Channels driven) 100W
Line Inputs Two, stereo (one with additional front mounted 3.5mm jack).
Line Input Sensitivity 640mV
Input Impedance 13k8 Ohms
Line Outputs One, stereo
Line Output Impedance 10 Ohms
Frequency Response (-3dB) < 2 Hz – > 250 kHz
Total Harmonic Distortion (8 Ohms, -1dB below full Power) 1 kHz <0.0015% (-96dB)
10 kHz <0.002% (-90 dB)
Crosstalk (10Hz – 20kHz) >80dB
S+N/N Ratio > 100 dB (Wide band)
> 110 dB (DIN)
> 115dB (IEC “A”)
Absolute Phase Phono Zero Degrees
CD Player
Distortion 1 kHz <0.002% (-94dB)
10 kHz <0.003% (-90dB)
Frequency Response (+/- 0.1dB) 20 Hz – 20 kHz
S+N/N Ratio >100dB (IEC “A”)
Digital Inputs – Coaxial & Optical
Distortion 1 kHz <0.0025% (-92dB)
10 kHz <0.004% (-88dB)
Frequency Response (+/- 0.1dB) 20 Hz – 20 kHz
S+N/N Ratio >96dB (IEC “A”)
Supported Word Lengths 16 to 24 Bit
Supported Sample Rates 44.1kHz, 48kHz, 88.2kHz, 96kHz, 192kHz
Digital Inputs – USB
Distortion <0.005%
S+N/N Ratio >96dB
Sampling rate 32kHz, 44.1Khz, 48kHz
Physical
Dimensions (HxWxD) 112 x 315 x 425mm / 4.41 x 12.40 x 16.73”
Weight 9.6kg/21.1lbs

 

Out of stock

SKU: siacd Categories: , , Tags: ,

Description

  • New class A/B “grounded source” 100W/Ch. power amp stages offering class leading performance
  • High performance DAC with USB, coaxial and optical digital inputs
  • On-board CD Player
  • Headphone amplifier with front panel mounted output
  • 2 x stereo line level analogue inputs
  • 1 x stereo line level output
  • Black or silver anodised finish options
  • Hand built in Stroud, UK
  • *This is Demo / Display Set Special Offer

Additional information

Weight 14 kg
Dimensions 63 x 42.5 x 25.8 cm

Reviews

There are no reviews yet.

Be the first to review “ATC SIACD CD/DAC Integrated Amplifier”

Your email address will not be published. Required fields are marked *