ENTRY SERIES  |  CLASSIC SERIES  |  TOWER SERIES  |  SPECIAL EDITIONS  |  ANNIVERSARY EDITIONS |  CENTERS  |  SUBWOOFERS  |  HTS ON WALL ELECTRONICS  | PROFESSIONAL SERIES

ATC PROFESSIONAL SERIES

ATC SCM12 PRO

ATC SCM12 PRO

Overview

  • Compact high performance 2-way studio monitor.
  • Ideally suited to:
    – critical near-field listening applications in all control rooms
    – LCR surround monitoring in small-to-medium control rooms.
    – surround channels for immersive audio (Auro 3D, Dolby Atmos, DTS-X)
  • Proprietary ATC 150mm/6˝ CLD Mid/Bass Driver.
  • Proprietary ATC 25mm/1˝ Dual Suspension Tweeter.
  • Wide dispersion.
  • 6 year warranty.

Installation version also available SCM12i.

    Drivers: HF ATC 1˝/25mm dual suspension Soft Dome (SH25-76 6 Ohm)
    LF ATC 6˝/150mm Constrained Layer Damping (CLD) (SB50-150CLD 8 Ohm)
    Amplitude Linearity: 80Hz – 16kHz (+/-2dB)
    Cut Off Frequencies: 56Hz – 22kHz (-6dB freestanding)
    Dispersion: ±80° Coherent Horizontal, ±10° Coherent Vertical
    Maximum Continuous SPL: 108dB (per pair @ 1m)
    Crossover Frequency: 2.2kHz
    Recommended Power Amplifier: 75 to 300 Watts
    Nominal Impedance: 8 Ohm
    Connectors: Binding Posts/4mm Plugs, bi-wire
    Cabinet Dimensions (HxWxD): 400x238x235mm/15.7˝x9.4˝x9.3˝
    Weight: 11kg/24lbs (per cabinet)

    ATC SCM100SCM12i Pro (Install)

    Anniversary

    SCM12i Pro (Install)

    Overview

    • The SCM12i Pro is a compact 2-way passive monitor designed for installation into recording, post production, broadcast and film studios.
    • It’s compact size and exceptional performance make it an ideal loudspeaker for use in surround/multi-channel recording/mixing and immersive audio applications such as Dolby Atmos, DTS:X and Auro 3D.
    • To facilitate simple install, the cabinet features mounting points compatible with popular wall/ceiling brackets.
    • The SCM12i is designed around the same philosophy as ATC’s 2 and 3-way active monitor loudspeakers and also employs driver components & technology found in these larger models resulting in exceptional consistency across the product range.

    Features

    • Wide bandwidth & high SPL capability
    • Neutral timbre & low distortion for low listener fatigue
    • 150mm / 6” ATC CLD Bass Driver
    • 25mm / 1” ATC Dual-Suspension HF Driver
    • Cabinet mounting points for wall/ceiling mount
    • 6 year warranty

    Drivers: HF ATC 1˝/25mm dual suspension Soft Dome (SH25-76 6 Ohm)
    LF ATC 6˝/150mm Constrained Layer Damping (CLD) (SB50-150CLD 8 Ohm)
    Amplitude Linearity: 80Hz – 16kHz (+/-2dB)
    Cut Off Frequencies: 56Hz – 22kHz (-6dB freestanding)
    Dispersion: ±80° Coherent Horizontal, ±10° Coherent Vertical
    Maximum Continuous SPL: 108dB (per pair @ 1m)
    Crossover Frequency: 2.2kHz
    Recommended Power Amplifier: 75 to 300 Watts
    Nominal Impedance: 8 Ohm
    Connectors: Binding Posts/4mm Plugs, bi-wire
    Cabinet Dimensions (HxWxD): 400x238x235mm/15.7˝x9.4˝x9.3˝ (eye bolt adds 40mm to the depth)
    Weight (Per Cabinet): SCM12 Pro 11kg/24lbs, SCM12i Pro 15kg/33lbs

    ATC SCM20PSL Pro

    SCM20PSL Pro

    Overview

    • Compact very high performance passive 2-way studio monitor
    • Ideally suited to:

    – critical near-field listening applications in all control rooms
    – LCR surround monitoring in small-to-medium control rooms
    – surround channels in medium-to-large control rooms

    • Proprietary ATC 150mm/6” Super Linear Mid/Bass Driver
    • Proprietary ATC 25mm/1” Dual Suspension ‘S-Spec’ Tweeter
    • Wide, even dispersion

    SCM20PSL Pro
    Drivers: LF 6.5”/150mm Super Linear, HF 1”/25mm Dual-Suspension ‘S-Spec’ Tweeter
    Amplitude linearity : 80Hz – 20kHz (+/-2dB)
    Cut-off frequencies : 55Hz – 25kHz (-6dB freestanding)
    Dispersion : +/-80° coherent horizontal, +/-10° coherent vertical
    Maximum continuous SPL : 108dB (per pair @ 1m)
    Crossover frequency : 2.5kHz
    Recommended Amplifier Power: 75 to 300 Watts
    Nominal Impedance : 8 Ohm
    Connectors : 2 x Pairs Binding Posts/4mm Plugs – Bi-Wireable
    Cabinet Dimensions (HxWxD) : 450x250x294mm (17.7″x9.8″x11.6″)
    Weight : 18kg/39.7lbs (per cabinet)

    ATC SCM20ASL Pro

    SCM20ASL Pro

    Overview

    • Compact very high performance 2-way studio monitor ideally suited to:
      – critical near-field listening applications in all control rooms
      – LCR surround monitoring in small-to-medium control rooms
      – surround channels in medium-to-large control rooms
    • Proprietary ATC 150mm/6” Super Linear Mid/Bass Driver
    • Proprietary ATC 25mm/1” S-Spec Tweeter
    • Discrete MOSFET class A/B bi-amp pack with 200W/50W
      continuous power output

    Drive unit – Low Frequency (LF): 6.5”/150mm Super Linear with 75mm/3″ voice coil (SB75-150SL 8 Ohm)
    Drive unit – High Frequency (HF): 1”/25mm dual suspension Soft Dome (SH25-76S 6 Ohm)
    Amplitude Linearity (±2dB): 80Hz-20kHz
    Cut-off Frequencies (-6dB, free-standing): 55Hz, 25kHz
    Horizontal Dispersion: ±80°, Coherent
    Vertical Dispersion: ±10°, Coherent
    Max. Continuous SPL (1 metre): 108dB
    Crossover Frequency: 2.1kHz
    Input Connectors: Male XLR
    Input Sensitivity: 1V
    Input Sensitivity Trim: -12dB (1V – 4V)
    Input Impedance: Balanced > 10kΩ
    Amplifier Output: Bass 200W, High 50W
    Filters: 2nd Order Critically Damped
    Overload Protection: Active FET momentary gain reduction
    Front Panel Indicators: Power On indicator, Gain Reduction warning
    Dimensions (HxWxD): 450 x 250 x 392mm (17.72˝ x 9.84˝ x 15.43˝)
    Weight: 23.4kg / 51.6lbs

    ATC SCM25A Pro

    SCM25A Pro

    Overview

    • 25mm neodymium soft dome tweeter.
    • ATC hand built 3˝/75mm soft dome mid driver.
    • ATC hand built 6.5˝/164mm carbon-paper cone bass driver.
    • On-board grounded source 235W class A/B 3-way amplifier.
    • Compact size with high output and low cut-off frequency.
    • 19˝ rack mountable.
    • 6 year warranty.

    Drivers: HF 25mm soft dome, Mid 75mm soft dome, LF 6.5″/164mm short-coil carbon paper cone
    Amplitude Linearity (±2dB): 74Hz-17kHz
    Cut-off Frequencies (-6dB, free-standing): 47Hz-22kHz
    Dispersion: ±80° Coherent Horizontal, ±10° Coherent Vertical
    Max. Continuous SPL (1 metre): 109dB
    Audio Input: Rear panel mounted female xlr (pin 2 +)
    Input Sensitivity: 1V rms (ref. full output)
    Input Sensitivity Trim: 0dB to -6dB/1V – 2V (continuously variable via rear panel trimmer)
    Input Impedance: Balanced > 10kΩ
    Amplifier Output Power: Bass 150W rms, Mid 60W rms, High 25W rms
    Crossover Frequencies: 380Hz & 3.5Khz
    Crossover Filters: 4th order critically damped with phase compensations
    Low Frequency Boost: 0dB to +3dB at 40Hz (continuously variable via rear panel trimmer)
    Overload Protection: Active FET momentary gain reduction
    Dimensions (HxWxD): 264 x 430 x 369mm (10.4˝ x 16.9˝ x 14.5˝).  Handles add an 39mm/1.5″ to depth.
    Weight: 30kg / 66lbs (per cabinet)

    ATC SCM45A Pro

    SCM45A Pro

    Overview

    • Mid-size very high performance  active 3-way studio monitor
    • Ideally suited to:
      – critical near-field listening applications in all control rooms
      – LCR surround monitoring in medium control rooms
      – surround channels in medium-to-large contol rooms
    • ATC hand built 6.5˝/164mm carbon-paper cone bass driver.
    • ATC 25mm/1” Dual-Suspension ‘S-Spec’ Tweeter
    • Discrete MOSFET class A/B tri-amp pack with 150W/60W/25W
      continuous power output

    Drivers: HF 1″/25mm Dual-Suspension ‘S-Spec’,  Mid 3″/75mm Soft Dome, LF 6.5″/164mm short-coil carbon paper cone
    Amplitude Linearity (±2dB): 70Hz-17kHz
    Cut-off Frequencies (-6dB, free-standing): 42Hz-25kHz
    Dispersion: ±80° Coherent Horizontal, ±10° Coherent Vertical
    Max. Continuous SPL (1 metre): 112dB
    Audio Input: Rear panel mounted female xlr (pin 2 +)
    Input Sensitivity: 1V rms (ref. full output)
    Input Sensitivity Trim: 0dB to -6dB/1V – 2V (continuously variable via rear panel trimmer)
    Input Impedance: Balanced > 10kΩ
    Amplifier Output Power: Bass 150W rms, Mid 60W rms, High 25W rms
    Crossover Frequencies: 380Hz & 3.5Khz
    Crossover Filters: 4th order critically damped with phase compensations
    Low Frequency Boost: 0dB to +3dB at 40Hz (continuously variable via rear panel trimmer)
    Overload Protection: Active FET momentary gain reduction
    Dimensions (HxWxD): 353 x 600 x 375mm (13.9˝ x 23.6˝ x 14.8˝).  Handles add an additional 39mm/1.5″ to depth.
    Weight: 36kg / 79.2lbs (per cabinet)

    ATC SCM50ASL Pro

    SCM50ASL Pro

    Overview

    • ATC 25mm/1” Dual Suspension ‘S-Spec’ Tweeter.
    • Full “SL” spec 9˝/234mm bass driver.
    • ATC 75mm “Super Dome” mid driver.
    • On board grounded source 350W Tri-amp pack.
    • LF contour control.
    • Clip indication.
    • 6 year warranty.

    Drivers: HF 1″/25mm, Mid 3″/75mm, LF 9″/234mm
    Amplitude Linearity (±2dB): 70Hz-17kHz
    Cut-off Frequencies (-6dB, free-standing): 38Hz, 25kHz
    Horizontal Dispersion: ±80°, Coherent
    Vertical Dispersion: ±10°, Coherent
    Max. Continuous SPL (1 metre): 112dB
    Crossover Frequencies: 380Hz, 3.5kHz
    Input Connectors: Male XLR
    Input Sensitivity: 1V
    Input Sensitivity Trim: 0dB to -6dB/1V – 2V (continuously variable via rear panel trimmer)
    Input Impedance: Balanced > 10kΩ
    Amplifier Output: Bass 200W, Mid 100W, High 50W Filters : Even Order Critically Damped
    Overload Protection: Active FET momentary gain reduction plus thermal tweeter protection
    Front Panel Indicators: Power On indicator, Gain Reduction warning
    LF EQ: 0dB to+6dB @ 40Hz (continuously variable via rear panel trimmer)
    Dimensions (HxWxD): 716 x 351 x 400mm (28.2˝ x 13.8˝ x 18.8˝) Depth with amplifier at rear adds 3˝
    Weight: 49kg / 107.8lbs

    ATC SCM100ASL Pro

    SCM100ASL Pro

    Overview

    • ATC 25mm/1” Dual Suspension ‘S-Spec’ Tweeter.
    • Full “SL” spec 12˝/314mm bass driver.
    • ATC 3″/75mm “Super Dome” mid driver.
    • On board grounded source 350W Tri-amp pack.
    • LF contour control.
    • Clip indication.
    • 6 year warranty.

    Drivers: HF 1″/25mm, Mid 3″/75mm, LF 12″/314mm
    Amplitude Linearity (±2dB): 65Hz-17kHz
    Cut-off Frequencies (-6dB, free-standing): 32Hz, 25kHz
    Horizontal Dispersion: ±80°, Coherent
    Vertical Dispersion: ±10°, Coherent
    Max. Continuous SPL (1 metre): 115dB
    Crossover Frequencies: 380Hz, 3.5kHz
    Input Connectors: Male XLR
    Input Sensitivity: 1V
    Input Sensitivity Trim: 0dB to -6dB/1V – 2V (continuously variable via rear panel trimmer)
    Input Impedance: Balanced > 10kΩ
    Amplifier Output: Bass 200W, Mid 100W, High 50W
    Filters: Even Order Critically Damped
    Overload Protection: Active FET momentary gain reduction plus thermal tweeter protection
    Front Panel Indicators: Power On indicator, Gain Reduction warning
    LF EQ: 0dB to+6dB @ 40Hz (continuously variable via rear panel trimmer)
    Dimensions (HxWxD): 832 x 398 x 581mm (32.8˝ x 15.7˝ x 22.9˝) Depth with amplifier at rear adds 3˝
    Weight: 65kg / 143lbs

    ATC SCM110ASL Pro

    SCM110ASL Pro

    Overview

    • ATC 25mm/1” Dual Suspension ‘S-Spec’ Tweeter.
    • Twin full “SL” spec 9˝/234mm bass driver.
    • ATC 75mm “Super Dome” mid driver.
    • On board ATC grounded source 350W Tri-amp pack.
    • LF contour control.
    • Clip indication.
    • 6 year warranty.

    Drivers: HF 1″/25mm, Mid 3″/75mm, LF 2x 9″/234mm
    Amplitude Linearity (±2dB): 50Hz-17kHz
    Cut-off Frequencies (-6dB, free-standing): 30Hz, 25kHz
    Horizontal Dispersion: ±80°, Coherent
    Vertical Dispersion: ±10°, Coherent
    Max. Continuous SPL (1 metre): 115dB
    Crossover Frequencies: 380Hz, 3.5kHz
    Input Connectors: Male XLR
    Input Sensitivity: 1V
    Input Sensitivity Trim: 0dB to -6dB/1V – 2V (continuously variable via rear panel trimmer)
    Input Impedance: Balanced > 10kΩ
    Amplifier Output: Bass 200W, Mid 100W, High 50W
    Filters: Even Order Critically Damped
    Overload Protection: Active FET momentary gain reduction plus thermal tweeter protection
    Front Panel Indicators: Power On indicator, Gain Reduction warning
    LF EQ: 0dB to+6dB @ 40Hz (continuously variable via rear panel trimmer)
    Dimensions (HxWxD): 715 x 625 x 420mm (28.2˝ x 24.5˝ x 16.5˝) Depth with amplifier at rear adds 3˝
    Weight: 73kg / 160.6lbs

    ATC SCM150ASL Pro

    SCM150ASL Pro

    Overview

    • ATC 25mm/1” Dual Suspension ‘S-Spec’ Tweeter.
    • Full “SL” spec 15˝/375mm bass driver.
    • ATC 75mm “Super Dome” mid driver.
    • On board ATC grounded source 350W Tri-Amp Pack.
    • LF contour control.
    • Clip indication.
    • 6 year warranty.

    Drivers: HF 1″/25mm, Mid 3″/75mm, LF 2x 9″/234mm
    Amplitude Linearity (±2dB): 50Hz-17kHz
    Cut-off Frequencies (-6dB, free-standing): 30Hz, 25kHz
    Horizontal Dispersion: ±8Drivers: HF 1″/25mm, Mid 3″/75mm, LF 15″/375mm
    Amplitude Linearity (±2dB): 60Hz-17kHz
    Cut-off Frequencies (-6dB, free-standing): 25Hz, 25kHz
    Horizontal Dispersion: ±80°, Coherent
    Vertical Dispersion: ±10°, Coherent
    Max. Continuous SPL (1 metre): 117dB
    Crossover Frequencies: 380Hz, 3.5kHz
    Input Connectors: Male XLR
    Input Sensitivity: 1V
    Input Sensitivity Trim: 0dB to -6dB/1V – 2V (continuously variable via rear panel trimmer)
    Input Impedance: Balanced > 10kΩ
    Amplifier Output: Bass 200W, Mid 100W, High 50W
    Filters: Even Order Critically Damped
    Overload Protection: Active FET momentary gain reduction plus thermal tweeter protection
    Front Panel Indicators: Power On indicator, Gain Reduction warning
    LF EQ: 0dB to+6dB @ 40Hz (continuously variable via rear panel trimmer)
    Dimensions (HxWxD): 884 x 498 x 568mm (34.8˝ x 19.6˝ x 22.4˝) Depth with amplifier at rear adds 3˝
    Weight: 75kg / 165lbs0°, Coherent

    Vertical Dispersion: ±10°, Coherent
    Max. Continuous SPL (1 metre): 115dB
    Crossover Frequencies: 380Hz, 3.5kHz
    Input Connectors: Male XLR
    Input Sensitivity: 1V
    Input Sensitivity Trim: 0dB to -6dB/1V – 2V (continuously variable via rear panel trimmer)
    Input Impedance: Balanced > 10kΩ
    Amplifier Output: Bass 200W, Mid 100W, High 50W
    Filters: Even Order Critically Damped
    Overload Protection: Active FET momentary gain reduction plus thermal tweeter protection
    Front Panel Indicators: Power On indicator, Gain Reduction warning
    LF EQ: 0dB to+6dB @ 40Hz (continuously variable via rear panel trimmer)
    Dimensions (HxWxD): 715 x 625 x 420mm (28.2˝ x 24.5˝ x 16.5˝) Depth with amplifier at rear adds 3˝
    Weight: 73kg / 160.6lbs

    ATC SCM200ASL Pro

    SCM200ASL Pro

    Overview

    • Large format main monitor.
    • 34mm soft dome tweeter.
    • Twin full spec “SL” 12″/314mm bass drivers.
    • ATC 75mm “Super Dome” mid driver.
    • P4 rack-mount grounded source 850W class A/B amplifier.
    • 6 year warranty.

      Drivers: HF 1.25″/34mm, Mid 3″/75mm, LF 2 x 12″/314mm
      Amplitude Linearity (±2dB): 60Hz-12kHz
      Cut-off Frequencies (-6dB, free-standing): 32Hz, 20kHz (free standing) 25Hz, 20kHz (soffit mounted)
      Horizontal Dispersion: ±80°, Coherent
      Vertical Dispersion: ±10°, Coherent
      Max. Continuous SPL (1 metre): 118dB
      Crossover Frequencies: 380Hz, 3.5kHz
      Input Connectors: Male XLR
      Input Sensitivity: 2V
      Input Impedance: Balanced > 10kΩ
      Amplifier Output: Bass 275+275W, Mid 200W, High 100W
      Filters: Even Order Critically Damped
      Overload Protection: Active FET momentary gain reduction plus thermal tweeter protection
      Front Panel Indicators: N/A
      LF EQ: N/A
      Dimensions (HxWxD): 830 x 730 x 440mm (32.7″ x 28.7″ x 17.3″)
      Weight: 79kgs / 174lbs

      ATC SCM300ASL Pro

      SCM300ASL Pro

      Overview

      • Large format main monitor.
      • 34mm soft dome tweeter.
      • Twin full spec “SL” 15˝/375mm bass drivers.
      • ATC 75mm “Super Dome” mid driver.
      • P4 rack-mount grounded source 850W class A/B amplifier.
      • 6 year warranty.

          Drivers: HF 1.25″/34mm, Mid 3″/75mm, LF 2 x 15″/375mm
          Amplitude Linearity (±2dB): 50Hz-12kHz
          Cut-off Frequencies (-6dB): 25Hz, 20kHz (free standing) 20Hz, 20kHz (soffit mounted)
          Horizontal Dispersion: ±80°, Coherent
          Vertical Dispersion: ±10°, Coherent
          Max. Continuous SPL (1 metre): 121dB
          Crossover Frequencies: 380Hz, 3.5kHz
          Input Connectors: Male XLR
          Input Sensitivity: 2V
          Input Impedance: Balanced > 10kΩ
          Amplifier Output: Bass 275+275W, Mid 200W, High 100W
          Filters: Even Order Critically Damped
          Overload Protection: Active FET momentary gain reduction plus thermal tweeter protection
          Front Panel Indicators: N/A
          Dimensions (HxWxD): 884 x 925 x 460mm (34.8˝ x 36.4˝ x 18.7˝)
          Weight: 87kg / 191.4lbs

          Share This